Grp Walkway Grid

Introduction

Grp walkway grid is used in many places, especially in corrosive places or working environments with high corrosion resistance requirements. Grp walkway grid is made of a series of square pipes,fiberglass angle, fiberglass channel, etc. A complete set of walkway platform, which is composed of corresponding glass reinforced plastic grating, handrails, guardrail and stair platform, has multiple functions such as operation and appreciation.

The overall size of products is generally 1.22*3.66 meters and 1.22*2.44 meters. Common specifications are 20/25/30/35/38/40/50mm, etc. The anti-corrosion grp walkway grid is made of unsaturated polyester resin, glass fiber coarse sand (winding or pultrusion, medium alkali or no alkali) as the framework, and the whole shape is formed through the system of molding on the metal mold, the product appearance is smooth and beautiful.

Product Advantages

1. The grating has passed the load-bearing test and has superior bearing capacity, toughness, waterproofness, elasticity and no breakage.

2. The grating has been tested for flame retardancy, high safety, high insulation and durability.

3. The grating has been tested for corrosion and has strong safety. It is widely used in special occasions such as sewage treatment, power plants and offshore platforms.

4. The process of making the grille is rigorous. The surface of the product is processed by a number of processes and has a long service life. It truly realizes the performance characteristics of high strength, stainless steel, non-corrosion and maintenance-free, and has a wide range of uses, which can save costs for users.

Applications

Water Treatment: gutter cover, maintenance walkway, trash rack, flow sink;

Chemical Plant: stair raft, operating platform, guardrail, double floor, trench cover;

Textile Mill: replacing metal grille, wooden platform and covering cement;

Power Plant: chemical water workshop trench cover, wastewater pool, etc.;

Metal Surface Treatment: around highly corrosive containers, plating line walkways;

Pulp And Processing Plants: Stairs and slabs, floor walkways, places with high humidity;

Electronics Industry: trench cover, pickling workshop, anti-static (anti-static grille) and high cleanliness workshop;

Meat Processing Plants: corrosive ground, stairs, slippery floors and stairs step on board table;

Car Wash Room / Car Beauty Shop: car wash room drainage board, parking space, car wash floor trench cover;

Crane: on the aisle of a 3m or 6m long crane.

Production Process

Step 1: mix and configure the raw materials. Resin, glass fiber yarn, filler calcium powder in 1:1:1 ratio, stirring time 20 minutes.

Step 2: pouring. The mixture is poured onto a professional grille molding machine.

Step 3: pull yarn. Lay a layer of alkali – free yarn, thin grid laid 8 layers, greatly enhance the intensity of the grid.

Step 4: pressure film. The stirred material is poured into the mold and compacted mechanically and manually.

Step 5: heat curing. After the grille is heated, the raw materials are fused together for 20 minutes.

Step 6: cool the mold and remove the mold. After the above 5 processes, through the stripping, mold, grille semi-finished products are done.

Step 7: polish and wash with paint. The grille is polished and then coated with varnish or water.