FRP Walkway Solar

As the solar power maintenance walkway is used on the rooftop, it can not avoid long-term wind and rain. The solar rooftop walkway made of FRP has good corrosion resistance to acid, alkali, organic solvents, salts and many other gas and liquid media. At the same time, our FRP solar rooftop walkway has UV protection function, even in the sun, it will not fade.

Product Specification

When FRP gratings are used as walkways for rooftop, the main specifications are as follows:

	Type	FRP Molded Grating
	Mesh Size	38×38mm, 40×40mm
	Grating Thickness	25mm
	Load Bar Width	6.5/5.0mm, 7.0/5.0mm
	Weight	12.3kg/M2
	Application	Solar Rooftop Walkway
	Insulation Class	Strong
	Withstand Voltage Rating	Strong
	Custom Made	Yes

Mach’s Composite FRP grating used for the solar rooftop walkway is generally 0.4×4.04m after cutting, and it can be fixed with stainless steel fasteners (M-type, L-type, C-type). The fixing clip and the supporting structure can be connected by bolts and nuts or rivets.

Product Advantages

◾ Corrosion resistance, aging resistance, UV resistance, flame retardant, and insulation.

◾ No electromagnetic, good electrical insulation performance

No breakdown under 10KV voltage. It can be used on equipment sensitive to magnetism.

◾ Non-absorbent, non-slip, and anti-fatigue

FRP walkway solar is micro flexible, and it can relieve pressure on the waist when workers are working.

◾ Strong designability, flexible size, and convenient cutting

Its cutting and installation are simple, no hot fire and large lifting equipment are required, and only a small amount of labor and electric tools are required.

◾ Low maintenance cost and long service life

The manufacturing cost of FRP rooftop walkway gratings is 1.4-1.8 times that of steel gratings, the installation cost is 20-40% of carbon steel, and its maintenance cost is almost zero. Although the initial investment cost is slightly higher than the steel grating, the overall economic benefit is 4-5 times that of the steel grating.