FRP grating has the character of corrosion resistance, so car wash use it, it won’t rust, can use longer than other materials. It’s light weight and high strength, easy to cut and install, can design according requirements, has good designability. Besides, it has many colors, can custom, making car wash differently, and has good decorating effect. Using FRP grating in car wash, then workers don’t need to wear thick boots, water run away directly, and can improve working environment for workers.
FRP grating for car wash generally choose 38x38x38mm, panel size: 1220x3660mm and 1000x4000mm. The loading capacity is 4t/sqm, no need to worry they will be damaged. In addition, they are corrosion resistance, whatever the environment they won’t affected.
|Available Panel Size||Mesh Size||Depth||Color||Raw Materials|
|1220x3660mm, 1000x4000mm||38x38mm||38mm||Customized Colors||Resin+Aluminum Hydroxide+Fiber Glass|
📍 Method 1
For those car wash that need to cover grating completely, which means whole room will be covered with FRP grating. In this condition no need to dig pit, rise high into the air, and use hard material to support, the quantities is minimum, no modify to house structure, suitable for large scale car wash (more than 15 stalls).
📍 Method 2
If only cover stall, then decide size as per general washing requirement, suggested size is 6.1×3.66m, dig pit and make support underneath.
📍 Method 3
The more economical way is cover the same size like car, suggested size is 5×2.44m, then dig pit and make support underneath.
📍 Method 4
If the car wash only have normal drainage, then only cover under wheel, dig 2 trenches width about 0.6m under wheels, length can be determined according car length.
Besides above mentioned installation method for car wash grating, also need to pay attention to the grating color assortment, the mostly used color is: gray, yellow, black, blue, green, red, etc. Making good use of grating colors to match your car wash, will make gratings integrating with surroundings, and has extraordinary.